|
A generalized real-time geometric virtualization of material removal processes for a factory digital twin platform
JongWoo Han, Purdue University
Chang Hyeon Mun, Ulsan National Institute of Science and Technology
Martin Byung-Guk Jun, Purdue University
Hyung Wook Park, Ulsan National Institute of Science and Technology
|
|
A Practical Digital Twin Framework for Safe Human-Robot Collaboration in Resilient In-House Manufacturing
Harshkumar K. Parmar, University of Oklahoma Norman Campus
Shivakumar Raman, University of Oklahoma Norman Campus
|
|
A Semantic Evaluation Approach for Improving the Reliability of LLM Outputs in Manufacturing
Dongjun Yun, Purdue University
Martin Byung-Guk Jun, Purdue University
|
|
Active Cooling of Polymer-Ceramic Interfaces in Multi-Material Additive Manufacturing
Olorunfemi J. Esan, University of Massachusetts Lowell
Christopher Hansen, University of Massachusetts Lowell
Alireza Amirkhizi, University of Massachusetts Lowell
Ian M. McAninch, DEVCOM Army Research Laboratory
Stephen R. Cluff, DEVCOM Army Research Laboratory
Pauline M. Smith, DEVCOM Army Research Laboratory
Amy Peterson, University of Massachusetts Lowell
|
|
An Automated Construction Framework for Immersive Digital Twins with Ground-based CAD Pose Estimation
Huichan Park, Purdue University
Yuseop Sim, Purdue University
Byoungkwon Yoon, Purdue University
Asif Tanveer, Purdue University
Martin Byung-Guk Jun, Purdue University
Sang Won Lee, Sung Kyun Kwan University
|
|
An LLM-based multi-agent system for manufacturing decision support: material–process recommendation and process parameter optimization
Geonhwi Lee, Chung-Ang University
Yulseok Byun, Purdue University
Seungjae Han, Chung-Ang University
Martin Byung-Guk Jun, Purdue University
Hae-Jin Choi, Chung-Ang University
|
|
Bioinspired Lightweight Lattices for Thermal Management and Structural Stiffness: A Simulation Study
Shivani Pandit, Purdue University
Vinay Kenny
Salil Bapat, Purdue University
Ajay Malshe, Purdue University
|
|
Challenges and opportunities for advanced manufacturing to deliver war-winning technology to the warfighter
Clara Mock, DEVCOM Army Research Laboratory
Jian Yu, DEVCOM Army Research Laboratory
Eric Wetzel, DEVCOM Army Research Laboratory
Isaac Nault, DEVCOM Army Research Laboratory
Robert Jensen, DEVCOM Army Research Laboratory
James Snyder, DEVCOM Army Research Laboratory
Megan Lynch, DEVCOM Army Research Laboratory
Christopher Hoppel, DEVCOM Army Research Laboratory
|
|
Controllable failure in 3D printed carbon fiber PETG using programmable cooling conditions
Anna Keim, Purdue University
Monique McClain, Purdue University
|
|
Convergent Manufacturing of Metal-Ceramic Architectures for High-Temperature Environments
Sk Shamim Hasan Abir, Rensselaer Polytechnic Institute
Joni C. Dhar, Rensselaer Polytechnic Institute
Sandipan Mishra, Rensselaer Polytechnic Institute
Daniel Lewis, Rensselaer Polytechnic Institute
Johnson Samuel, Rensselaer Polytechnic Institute
|
|
Convergent manufacturing of smart metallic structures
Jinhan Ren, Rensselaer Polytechnic Institute
Shinan Huang, Rensselaer Polytechnic Institute
Sazedur Rahman, Rensselaer Polytechnic Institute
Fotis Kopsaftopoulos, Rensselaer Polytechnic Institute
Johnson Samuel, Rensselaer Polytechnic Institute
Semih Akin, Rensselaer Polytechnic Institute
|
|
Development of a Cold Spray-Based Dry Manufacturing Process for LFP Battery Cathode
Hayoung Jeong, Purdue University
Martin Byung-Guk Jun, Purdue University
|
|
Development of scalable FSR sensor array-based human footprint acquisition module for manufacturing automation
Hangyeom Lee, Purdue University
Yuseop Sim, Purdue University
Hojun Lee, Purdue University
Byoungkwon Yoon, Purdue University
Martin Byung-Guk Jun, Purdue University
|
|
Evaluating engagement-based learning opportunities in undergraduate manufacturing education
Salil Bapat, Purdue University
Ajay P. Malshe, Purdue University
|
|
Experimental Investigation of Thermal States in Polymer–Ceramic Multi-Material Additive Manufacturing
Jagadeesh Reddy Kanuboddu, University of Massachusetts Lowell
Amy Peterson, University of Massachusetts at Lowell
Alireza Amirkhizi, University of Massachusetts Lowell
Christopher J. Hansen, University of Massachusetts at Lowell
|
|
Experimental Methods for Characterizing Interfaces in Multi-Material Adhesive Joints
Kevin L. Cloherty, University of Massachusetts Lowell
Drupad Kadiyala Bhavani, University of Massachusetts Lowell
Dante P. Stigliano, University of Massachusetts Lowell
Alexander H. Krueger, University of Massachusetts Lowell
Christopher J. Hansen, University of Massachusetts Lowell
Amy M. Peterson, University of Massachusetts Lowell
Alireza V. Amirkhizi, University of Massachusetts Lowell
|
|
Experimental Study Of Mechanical Performance Of Fused Filament Fabricated Thin Walls Via Stress-Oriented Toolpath Planning Under Concentrated Compressive Load
Siying Chen, Purdue University
Xingyu Fu, University College Dublin
Fengfeng Zhou, Louisiana Tech University
Martin Byung-Guk Jun, Purdue University
|
|
Generative AI for decision making in the manufacturing systems
Xingyu Li, Purdue University
|
|
Hybrid Bio-Inspired Design Approach for Lightweighting in Additive Manufacturing: A Feasibility Study
Ryan Capstick, Purdue University
Shivani P. Pandit, Purdue University
Salil Bapat, Purdue University
|
|
Low-Cost Agile Tooling for Stamping Metallic and Composite Sheets Using a Hybrid 3D-Printed Composite Shell and a Core
Alireza Zarei, University of Delaware
Koorosh Delavari, Ohio State University - Main Campus
Mostafa Elnaggar, Ohio State University - Main Campus
Madhura Athale, Ohio State University - Main Campus
Taejoon Park, Ohio State University - Main Campus
Farhang Pourboghrat, Ohio State University - Main Campus
Srikanth Pilla, University of Delaware
|
|
Microstructure and mechanical behavior of high strength additive alloys with nanoscale precipitates
Hyeongseob Kim, Purdue University
Emiliano Flores, Purdue University
Xinghang Zhang, Purdue University
|
|
Multi-Scale In-Situ Powder Stream Characterization for Laser Directed Energy Deposition
Guang Yang, Purdue University
Clara Mock, DEVCOM Army Research Laboratory
Salil Bapat, Purdue University
Ajay Malshe, Purdue University
|
|
Photopolymerization-based additive manufacturing of glass microsphere-filled composites
Nzube Udegbunam, University of Massachusetts Lowell
Amy Peterson, University of Massachusetts at Lowell
Christopher Hansen, University of Massachusetts Lowell
Pauline Smith, USARMY DEVCOM ARL
Alireza Amirkhizi, University of Massachusetts Lowell
Ian McAninch, USARMY DEVCOM ARL
|
|
Powder Metal Characterization for Additive Manufacturing
Paul Mort, Purdue University
Donovan Stumpf, Purdue University
Rajeshree Varma, Purdue University
Dina Khattab, Purdue University
Xiaoling Shen, Purdue University
Michael Titus, Purdue University
Michael Sealy, Purdue University
Jeff Jaworek, Purdue University
Jake Kim, Purdue University
Langdon Feltner, Purdue University
|
|
Programmable Hybrid and Gradient Constant Mean Curvatures for High-Performance Multifunctional Mechanical Metamaterials
Ajith Annavajhula, Purdue University
Gary J. Cheng, Purdue University
|
|
Real-time two-stage machine sound monitoring for wire-EDM state recognition
Yuseop Sim, Purdue University
Yonghyun Lee, Purdue University
Edgar James Yother, MMRL
Duju Lee, Purdue University
Hojun Lee, Purdue University
Byoungkwon Yoon, Purdue University
Asif Tanveer, Purdue University
Martin Byung-Guk Jun, Purdue University
|
|
Resource Efficient Hybrid Manufacturing: Integration of Reconfigurable Tooling, Flexible Deformation and Non-Planar Deposition
Shivaprasad Cherukupally, Indian Institute of Technology Hyderabad
Venkata Reddy, Indian Institute of Technology Hyderabad
|
|
RGB-D Object Pose Estimation via SAM2 Segmentation and Coarse-to-Fine Point Cloud Registration
Daniel Sungwoo Bae, Purdue University
Changheon Han, Purdue University
Hangyeom Lee, Purdue University
Hojun Lee, Purdue University
Martin Byung-Guk Jun, Purdue University
|
|
Robust and Accurate Pose Estimation for In-Space Robotic Manufacturing under Challenging Lighting Conditions
Abhay Negi, University of Southern California
Rudranarayan Mukherjee, Jet Propulsion Laboratory, California Institute of Technology
Satyandra K. Gupta, University of Southern California
|
|
The Effect of Particle Fillers on the Adhesion of Co-printed Thermoplastics and Photopolymers using Dissimilar Material Printing
Jean Carlos Corraliza-Rodriguez, Purdue University
Christopher John Steines, Purdue University
James John Plotzke, Purdue University
Monique Suzanne McClain, Purdue University
|
|
Thermal analysis and fabrication of polyelectrolyte-ceramic composites
Rajeswari Das, University of Massachusetts Lowell
Amy M. Peterson, University of Massachusetts Lowell
Christopher Hansen, University of Massachusetts Lowell
Alireza Amirkhizi, University of Massachusetts Lowell
|
|
U.S. Army Allied Trades Specialist Workforce Development for Advanced Manufacturing
Christopher Bolton, 101st Airborne Division
Moises Chavez, 101st Airborne Division
Matthew Robert Patterson, University of Tennessee, Knoxville
Kaitlyn Toth, University of Tennessee, Knoxville
|
