Session 4: Welding and Coating |

Session 4: Welding and Coating

Subscribe to RSS Feed (Opens in New Window)

Schedule
	Antagonism between advanced coatings and lubricants? Jun Qu, Oak Ridge National Laboratory
	Computer-aided design of algorithms of pulsed control of arc welding process based on numerical simulation Oksana I. Shpigunova, Tomsk State University Anatoliy A. Glazunov, Tomsk State University
	Dynamic visualization of weld pool and appearance for manual arc welding based on quasi 3D mesh method Zhe Li, Xi’an Jiaotong University Zhenzhen Xu, Xi’an Jiaotong University Jianxun Zhang, Xi’an Jiaotong University
	Effect of Ce on microstructure of coarse grain heat affected zone in large heat input welding Shengfu Yu, Huazhong University of Science and Technology Ning Yan, Huazhong University of Science and Technology
	Effect of heat input on microstructure and formability of DP980 steel welded joints by fiber laser welding Qian Sun, Northeastern University
	Effect of Ni content and brazing temperature on the self joining of ZrB2–SiC Jiayin Liu, Harbin Institute of Technology Jie Zhang, Harbin Institute of Technology Chunfeng Liu, Harbin Institute of Technology Tianpeng Wang, Harbin Institute of Technology
	Effect of post-treatment on micro-structure and properties of Al2O3–13 wt%TiO2 plasma-spray coating Zehua Zhou, Hohai University
	Fatigue analysis of the welded region in the automotive torsion beam rear suspension system Nan Zhan, China FAW Corporation Limited Tianjin R&D Center Xiaochuan Zhang, Tianjin University of Commerce
	Fatigue analysis of the welded region in the automotive torsion beam rear suspension system Nan Zhan, China FAW Corporation Limited Tianjin R&D Center Xiaochuan Zhang, Tianjin University of Commerce
	Fluorescent materials design at nanoscale for biomedical photonics in near infrared window Kohei Soga, Tokyo University of Science Masao Kamimura, Tokyo University of Science
	Investigation of microstructure and mechanical properties of CP–Ti/Q345 filled with Cu-based wires Min Zhang, Xi’an University of Technology Qiaoling Chu, Xi’an University of Technology Jihong Li, Xi’an University of Technology Qingyang Fan, Xi’an University of Technology Weiwei Xie, Xi’an University of Technology
	Investigation of the susceptibility of cast superalloy K438 to liquation cracking during welding through Gleeble thermo-mechanical simulation testing Shaoqing Guo, Beijing Institute of Aeronautical Materials Siyi Tang, Beijing Institute of Aeronautical Materials Wanqing LI, Beijing Institute of Aeronautical Materials Renyao Qin, Beijing Institute of Aeronautical Materials
	Investigation of welding residual stress distribution in a WC–Co/sandwich foils/steels brazing joint with/without different defects Chao Jiang, Southwest Jiaotong University
	Numerical modeling and simulation of welding residual stresses using finite element method Jing Zheng, Purdue University Ayhan Ince, Purdue University
	Physical simulation of girth weld HAZ in high strength pipeline steels Yu Liu, China Petroleum Pipeline Research Institution
	Prediction of the welding residual stress and distortion in 10Ni5CrMoV steel considering solid phase transformation effect Yong Liu, Harbin Institute of Technology Ping Wang, Harbin Institute of Technology Hongyuan Fang, Harbin Institute of Technology
	Refilled friction stir spot welding of aluminum alloy to galvanized steel Honggang Dong, Dalian University of Technology Su Chen, Dalian University of Technology Yang Song, Dalian University of Technology Xin Guo, China FAW Corporation Limited Xiaosheng Zhang, China FAW Corporation Limited Zhiyang Sun, China FAW Corporation Limited
	Review on joining of advanced materials and dissimilar materials in Harbin Institute of Technology Jun Qu, Oak Ridge National Laboratory Yongping Lei, China Nuclear Power Design Company Peng He, Harbin Institute of Technology Yunlong Chang, Shenyang University of Technology
	Simulation of the influence of preheating on stress distribution during multi-pass repair welding of cast steel Wen Wang, Huazhong University of Science and Technology Jian-xin Zhou, Huazhong University of Science and Technology Ya-jun Yin, Huazhong University of Science and Technology
	Simulation on the sealing of aluminum ball joint Haobin Tian, Shanghai Second Polytechnic University Xiaohang Liu, Shanghai Second Polytechnic University Xuelei Li, Shanghai Second Polytechnic University Jun Feng, Shanghai Huizhong Automotive Manufacturing Corporation
	Study on the new heat source model of AZ31B magnesium alloy laser–TIG hybrid welding Zhonglin Hou, Dalian University of Technology Zhaodogn Zhang, Dalian University of Technology Liming Liu, Dalian University of Technology
	The deformation and residual stress simulation of dual laser-beam bilateral synchronous welding for Al-alloy aircraft panel structure Xiaohong Zhan, Nanjing University of Aeronautics and Astronautics Yun Liu, Nanjing University of Aeronautics and Astronautics Yao Meng, Nanjing University of Aeronautics and Astronautics Wenmin Ou, Nanjing University of Aeronautics and Astronautics Yanhong Wei, Nanjing University of Aeronautics and Astronautics
	The influence of boss welding on ERW line pipe Meijuan Hu, China National Petroleum Corporation
	The influence of welding thermal cycle on microstructure and mechanical properties for 9Cr2WVTa steel Jian Wang, Institute of Metal Research, Chinese Academy of Sciences Shanping Lu, Institute of Metal Research, Chinese Academy of Sciences Lijian Rong, Institute of Metal Research, Chinese Academy of Sciences Dianzhong Li, Institute of Metal Research, Chinese Academy of Sciences
	The phenomenon of high frequency confinement on TIG arc in TIG arc welding Yunlong Chang, Shenyang University of Technolgy
	Thermal simulation study on welding heat affected zone of oil tank steel Guoli Liang, Tangshan College Tieli Qi, Tangshan College Jing Li, Tangshan College
	Thermal–mechanical simulation on the welding distortion of bulk tubular assembly Ping Wang, Harbin Institute of Technology Hongyuan Fang, Harbin Institute of Technology Pingsha Dong, University of Michigan
	Ultrasonic Denoising Technique for Defect Detection in Austenitic Steel Weldment Dazhao Chi, Harbin Institute of Technology Chengle Mai, Harbin Institute of Technology Tie Gang, Harbin Institute of Technology
	Weld thermal simulation of CrMoV with PWHT in type IV region Bin Xu, Southwest University of Science and Technology
	Wetting and interfacial microstructure of porous Si3N4/Si3N4 joint after silver metallization Yanli Zhuang, Harbin Institute of Technology Tiesong Lin, Harbin Institute of Technology Shengjin Wang, Harbin Institute of Technology Peng He, Harbin Institute of Technology Dusan P. Sekulic, University of Kentucky Dechang Jia, Harbin Institute of Technology Hongmei Wei, Harbin Institute of Technology

Session 4: Welding and Coating

Search

Links

Links for Authors

Browse