Experiments on opto-electrically generated microfluidic vortices

Aloke Kumar, Birck Nanotechnology Center, Purdue University, West Lafayette
Stuart J. Williams, Purdue University - Main Campus
Steven T. Wereley, Birck Nanotechnology Center, Purdue University, West Lafayette

Abstract

Strong microfluidic vortices are generated when a near-infrared (1,064 nm) laser beam is focused within a microchannel and an alternating current (AC) electric field is simultaneously applied. The electric field is generated from a parallel-plate, indium tin oxide (ITO) electrodes separated by 50 lm. We present the first l-PIV analysis of the flow structure of such vortices. The vortices exhibit a sink-type behavior in the plane normal to the electric field and the flow speeds are characterized as a function of the electric field strength and biasing AC signal frequency. At a constant AC frequency of 100 kHz, the fluid velocity increases as the square of the electric field strength. At constant electric field strength fluid velocity does not change appreciably in the 30–50 kHz range and it decreases at larger frequencies ([1 MHz) until at approximately 5 MHz when Brownian motion dominates the movement of the 300 nm l-PIV tracer particles. Presence of strongly focused laser beams in an interdigitated-electrode configuration can also lead to strong microfluidic vortices. When the center of the illumination is focused in the middle of an electrode strip, particles experiencing negative dielectrophoresis are carried towards the illumination and aggregate in this area.

Discipline(s)

Nanoscience and Nanotechnology