|
3D FE modelling of die stress and wear in non-isothermal forging of Ti–6Al–4V turbine blade
Shiyuan Luo, Wuhan University of Technology; HUST-Wuxi Research Institute
Dahu Zhu, Wuhan University of Technology; HUST-Wuxi Research Institute
Lin Hua, Wuhan University of Technology
Dongsheng Qian, Wuhan University of Technology
Sijie Yan, HUST-Wuxi Research Institute; Huazhong University of Science and Technology
|
|
A thermodynamically consistent distortional hardening model for AZ31 with experimental validation
Baodong Shi, Yanshan University; Fusheng Pan, Chongqing University
Yan Peng, Yanshan University; Fusheng Pan, Chongqing University
Fusheng Pan, Yanshan University
Jianliang Sun, Yanshan University
Chong Yang, Yanshan University
|
|
Ab initio simulations to investigate the correlation between the local melt structure and segregation behavior of Fe, V, Ti, and Si in liquid Al
Jiao Zhang, Shanghai Jiao Tong University
Yongbing Dai, Shanghai Jiao Tong University
|
|
Assessment of high cycle fatigue crack growth under different stages based on crystal plasticity modeling
Duoqi Shi, Beihang University; Collaborative Innovation Center of Advanced Aero-engine
Shiwei Han, Beihang University
Xiaoguang Yang, Beihang University; Collaborative Innovation Center of Advanced Aero-engine
|
|
Atomic structure and energetics of amorphous–crystalline CuZr interfaces: A molecular dynamics study
X. Z. Gao, Shanghai Jiao Tong University
M. H. Müser, Universität des Saarlandes
LT Kong, Shanghai Jiao Tong University
J. F. Li, Shanghai Jiao Tong University
|
|
Atomistic characterization of solid–liquid interfaces in Cu–Ni binary system
Chen Qi, Shanghai Jiao Tong University
L. T. Kong, Shanghai Jiao Tong University
J. F. Li, Shanghai Jiao Tong University
|
|
Calculation of thermodynamic and physical properties in multi-component systems
Shuanglin Chen, CompuTherm, LLC
Weisheng Cao, CompuTherm, LLC
Fan Zhang, CompuTherm, LLC
Chuan Zhang, CompuTherm, LLC
Jun Zhu, CompuTherm, LLC
|
|
CALPHAD-based materials genome and its applications to additive manufacturing
Wei Xiong, University of Pittsburgh
|
|
Design and validation of parametric modelling platform based on ABAQUS
Weiwei Wang, Harbin Institute of Technology at Weihai
Binbin Jia, Harbin Institute of Technology at Weihai
Nan Zheng, Harbin Institute of Technology at Weihai
Chen Zhao, Harbin Institute of Technology at Weihai
|
|
DFT calculations and experimental study of the lattice distortion on phase transition properties of the polycrystalline VO2 thin film
Langping Wang, Harbin Institute of Technology
Tiegui Lin, Harbin Institute of Technology
Yuqiang Ge, Harbin Institute of Technology
Xiaofeng Wang, Harbin Institute of Technology
|
|
Elastocaloric effect and local temperature evolution associated with structural transformation in superelastic alloys: A phase-field study
Jiafeng Wan, Shanghai Jiao Tong University
Shushan Cui, Shanghai Jiao Tong University
Xunwei Zuo, Shanghai Jiao Tong University
Nailu Chen, Shanghai Jiao Tong University
|
|
FE simulation for accuracy evolution and control in hot forging of non-circular spur bevel gear
Wuhao Zhuang, Wuhan University of Technology
Xinghui Han, Wuhan University of Technology
|
|
FEM investigation of spike forging test
Josef Hodek, COMTES FHT
Miroslav Urbanek, COMTES FHT
Michal Duchek, COMTES FHT
|
|
FEM simulation of laser shock processing on surface morphology and residual stress field of Ti-17 titanium alloy with different laser impact times
Rujian Sun, Beihang University
Ying Zhu, Beihang University
Wei Guo, Beihang University
Peng Peng, Beihang University
|
|
Fine element simulation of a modified fine-blanking process to eliminate the die-roll size
Lin Hua, Wuhan University of Technology
Bo Tang, Wuhan University of Technology
Yanxiong Liu, Wuhan University of Technology
Huajie Mao, Wuhan University of Technology
|
|
Flow stress and microstructure models of alloys
Lars-Erik Lindgren, Lulea University of Technology
|
|
Integrated computational materials engineering in quenching and tempering of extra-large rotors
Mengnie V. Li, Kunming University of Science and Technology
Ying Yang, China Nuclear Power Technology Research Institute
Hengyong Bu, Kunming University of Science and Technology
Xuejiao Zhang, China First Heavy Industries
|
|
Integration of advanced simulation and visualization for material processing
Chenn Zhou, Purdue University
|
|
Is there TRIP effect? Verification from finite element simulation
Yonghua Rong, Shanghai Jiao Tong University
Nailu Chen, Shanghai Jiao Tong University
Xunwei Zuo, Shanghai Jiao Tong University
Jianfeng Wan, Shanghai Jiao Tong University
Rui Feng, Shanghai Jiao Tong University
|
|
Liquid/substrate interface for the heterogeneous nucleation in grain refinement of Al alloys
Yanfeng Han, Shanghai Jiao Tong University
Jun Xu, Shanghai Jiao Tong University
Hanlong Zhang, Shanghai Jiao Tong University
Yongbing Dai, Shanghai Jiao Tong University
Jiao Zhang, Shanghai Jiao Tong University
Jun Wang, Shanghai Jiao Tong University
Baode Sun, Shanghai Jiao Tong University
|
|
Molecular dynamics study of growth of silicon from melt and formation of dislocation
Naigen Zhou, Nanchang University
Chi Zhang, Nanchang University
Bo Liu, Nanchang University
Rongyao Luo, Nanchang University
Ke Li, Nanchang University
Lang Zhou, Nanchang University
|
|
MPFEM simulation on 2D compaction of core–shell particulate composites
Yu Liu, Northeastern University
Fen Huang, Northeastern University
Peng Han, Northeastern University
Xizhong An, School of Metallurgy, Northeastern University
Haitao Fu, Northeastern University
|
|
Multiscale modeling of thermal properties for graphene–polymer nanocomposites
Maoyuan Li, Huazhong University of Science and Technology
|
|
Precipitation modeling of multi-component commercial alloys
Weisheng Cao, CompuTherm
Fan Zhang, CompuTherm
Shuanglin Chen, CompuTherm
Chuan Zhang, CompuTherm
Jun Zhu, CompuTherm
|
|
Recent advances in four-dimensional studies of advanced materials and processing
Jiawei Mi, University of Hull
|
|
Study on growth model of cellular automata method in solidification simulation
Zhao Guo, Huazhong University of Science and Technology
Jian-xin Zhou, Huazhong University of Science and Technology
Ya-jun Yin, Huazhong University of Science and Technology
Chang-chang Liu, Huazhong University of Science and Technology
|
|
Thermodynamic and compositional assessment of Q-phase in Al–Si–Mg–Cu alloys using 3DAPT and in-situ TEM
Andrew Bobel, Northwestern University
Weiwei Zhang, QuesTek Innovations LLC
Nick Hatcher, QuesTek Innovations LLC
Qigue Wang, General Motors Warren Technical Center
Mike Walker, General Motors Warren Technical Center
Greg Olson, Northwestern University; QuesTek Innovations LLC
|
