Design and fabrication of a self-calibrating germanium photodiode for radiometric application

Daniel Li-Chung Huang, Purdue University

Abstract

This thesis concerned with design and fabrication of an absolute radiometric detector operated over 0.7 to 1.5 $\mu$m wavelength range. This application requires a semiconductor photodiode with high internal quantum efficiency and long term stability. Of many possible materials, germanium is chosen because high quality material is available, the fabrication processes are relatively straight forward, and a high quantum efficiency is achievable. The fabrication procedures for a germanium cell were developed. Two types of germanium photodiodes were fabricated and tested. In both photodiodes, a channel stop has been employed to reduce the lateral current due to surface inversion. Ion implantation is used to form the n$\sp+$-p junction, the channel stop and the back surface field. To reduce the surface recombination, CVD SiO$\sb2$ was deposited for surface passivation. A Ti/Pd/Ag metal layer was then sputtered to make the interconnections. With this process, dark current as low as 0.35 mA/cm$\sp2$ has been observed on a 2 $\Omega$-cm substrate. The n$\sp+$pp$\sp+$ photodiodes had a considerably lower quantum efficiency than the induced junction photodiodes. It is shown by computer simulation that the internal quantum efficiency, $\eta$, of and n$\sp+$pp$\sp+$ diode is strongly affected by the carrier lifetime, $\tau$, in the emitter and the surface recombination velocity, S, at the SiO$\sb2$-Ge surface. The high quantum efficiency in the induced junction diodes can be attributed to the absence of implantation induced damage in the emitter, and an electric field near the surface, induced by the fixed charges in the SiO$\sb2$ layer. With the induced junction structure, we have observed internal quantum efficiency of 98.8% at 0.7 $\mu$m and of 97% at 1.5 $\mu$m.

Degree

Ph.D.

Advisors

Schwartz, Purdue University.

Subject Area

Electrical engineering

COinS