Microstructural Controls on the Macroscopic Behavior of Analogue Rocks (Geo-Architected Rocks)

Chven Andreas M Mitchell, Purdue University

Abstract

Probing the subsurface for evidence related to the degradation of porous mediums and the evolution of damage mechanisms has been a long-standing challenge in geophysics. As such imaging and predicting fracture network development has remained a difficult area for subsurface science for decades despite the seminal and significant works put forward by many researchers. While this has provide great understanding about the behaviours and properties of natural porous media, there is still much that needs to be explored particularly in regard to the mineralogical composition and chemistry of clay-rich rocks. Despite the fact that argillaceous rocks which consist of different types of clays and varied mineral composition are ubiquitous in nature and are often the target of several technologies (e.g. geotechnical engineering, nuclear waste storage and disposal,hydrocarbon exploration and extraction, carbon capture and sequestration, etc.), many studies focus primarily on the bulk properties or the percentage of components in the matrix. For these reason and due to the problems that can be encountered with natural rocks that contain a swelling clay component whether randomly distirbuted or localized in consolidated globs in zones of the matrix, the influence of clay chemistry in relation to fracture development which is not well characterized, especially during desaturation is investigated with analogue rock samples which were systematically fabricated for this purpose.The research performed in this dissertation investigated, the applicability of the fabrication protocol for developing synthetic rocks with desirable rock like features and behavior, the impact and relationship between the rock properties, the microstructural composition, water loss, and the macroscopic behavior of the analogue rocks, focusing on the structure and chemistry of the constituent clay materials. Synthetic rocks were fashioned with the necessary geometries, properties, and material compositions. On the macroscopic scale the fracture and drying behavior of the synthetic rocks were examined with 3D X-ray microscopy and further evaluated through the utility of acoustic emission monitoring, water loss monitoring, and unconfined compressive testing. On the finer scale (nano-microscale), the chemical and mechanical properties, and behavior of select clays was explored by exploiting several methods of material characterization which also included cation exchange experiments coupled with inductively coupled plasma optical emission spectrometry (ICP-OES).For the finer scale, experiments verified that calcined kaolinite clay had a different mineral structure and negligible to non-existence shrinkage abilities. In contrast, the montmorillonite clays possessed higher and similar moisture contents but, owing to the different principal cations these clays interacted a bit differently in the highly akaline environment, experienced varying degrees of shrinkage, and had observedly minor structural dissimilarities. For the relatively larger scale, the emergence of damage, extent of the damage network, and the patterns of the crack network mainly depended on the microstructural composition of the analogue rocks, particularly it’s clay chemistry and/ or distribution. The location of damage depended on the emplacement and percentage of swelling clay in the matrix, and numerical investigations with peridynamics revealed that the observed damage was a consequence of the action of the swelling and non-swelling components of the matrix.

Degree

Ph.D.

Advisors

Ajo-Franklin, Purdue University.

Subject Area

Acoustics|Mineralogy

COinS