Integrated Multi-Physics Modeling of Steelmaking Process in Electric ARC Furnace
Abstract
The electric arc furnace (EAF) is a critical steelmaking facility that melts the scrap by the heat produced from electrodes and burners. The migration to EAF steelmaking has accelerated in the steel industry over the past decade owing to the consistent growth of the scrap market and the goal of "green" steel production. The EAF production already hit a new high in 2018, contributing to 67% of total short tons of U.S. crude steel produced. The EAF steelmaking process involves dynamic complex multi-physics, in which electric arc plasma and coherent jets coexist resulting in an environment with local high temperature and velocity. Different heat transfer mechanisms are closely coupled and the phase change caused by melting and re-solidification is accompanied by in-bath chemical reactions and freeboard post-combustion, which further creates a complicated gas-liquid-solid three-phase system in the furnace. Therefore, not all conditions and phenomena within the EAF are well-understood. The traditional experimental approach to study the EAF is expensive, dangerous, and labor-intense. Most of the time, direct measurements and observations are impossible due to the high temperature within the furnace. To this fact, the numerical model has aroused great interest worldwide, which can help to gain fundamental insights and improve product quality and production efficiency, greatly benefiting the steel industry. However, due to the complexity of the entire EAF steelmaking process, the relevant computational fluid dynamics (CFD) modeling and investigations of the whole process have not been reported so far.The present study was undertaken with the aim of developing the modeling methodologies and the corresponding comprehensive EAF CFD models to simulate the entire EAF steelmaking process. Two state-of-the-art comprehensive EAF CFD models have been established and validated for both the lab-scale direct current (DC) EAF and the industry-scale alternating current (AC) EAF, which were utilized to understand the physical principles, improve the furnace design, optimize the process, and perform the trouble-shootings.For the lab-scale DC EAF, a direct-coupling methodology was developed for its comprehensive EAF CFD model which includes the solid steel melting model based on the enthalpy-porosity method and the electric arc model (for lab-scale DC arc) based on the Magneto Hydrodynamics (MHD) theory, so that the dynamic simulation of the steel ingot melting by DC arc in the lab-scale furnace can be achieved, which considered the continuous phase changing of solid steel, the ingot surface deformation, and the phase-to-phase interaction. Both stationary DC arc and the arc-solid steel interface heat transfer and force interaction were validated respectively against the experimental data in published literature. For the given lab-scale furnace, the DC arc behavioral characteristics with varying arc lengths generated by the moving electrode were analyzed, and the effects of both the initial arc length and the dynamic electrode movement on the steel ingot melting efficiency were revealed.For the industry-scale AC EAF, an innovative integration methodology was proposed for its comprehensive EAF CFD model, which relies on the stage-by-stage approach to simulate the entire steelmaking process. Six simulators were developed for simulating sub-processes in the industry-scale AC EAF, and five models were developed for the above four simulators, including the scrap melting model, the electric arc model (for industry-scale AC arc), the coherent jet model, the oxidation model, and the slag foaming model, which can be partially integrated according to the mass, energy, and momentum balance.
Degree
Ph.D.
Advisors
Shih, Purdue University.
Subject Area
Energy|Fluid mechanics|Marketing|Materials science|Mathematics|Mechanics|Thermodynamics
Off-Campus Purdue Users:
To access this dissertation, please log in to our
proxy server.