Applying Heat Pipes to Install Natural Convection and Radiative Cooling on Concentrating Photovoltaics
Abstract
Concentrator photovoltaics have demonstrated greater solar energy production efficiency than previous solar electric technologies. However, recent research reveals that heat management is a significant difficulty in CPV systems, and if left unaddressed, it can have a severe influence on system efficiency and lifetime. Traditional CPV cooling relies on active methods such as forced air convection, or liquid cooling, which might lead to an extremely large parasitic power use. In addition, the moving parts of a cooling system result in a shorter lifespan and higher maintenance expenses. CPV systems can boost their efficiency and lifespan by adopting passive cooling solutions. This work employed radiative cooling and natural convection to construct an efficient and cost-effective cooling system. The excess heat of a solar cell can be dispersed into space via electromagnetic waves via radiative cooling. Due to the fact that the radiative cooling power is related to the difference between the fourth powers of the solar cell and the ambient temperature, much greater cooling powers can be obtained at higher temperatures. Heat pipes were installed to act as a heat pump by transferring excessive heat from solar cells within a system to the exterior, where it can be dissipated via natural air cooling and thermal radiation. Experiments conducted in this study demonstrate that a temperature reduction of 21 ◦C was accomplished through radiative cooling and natural convection, resulting in an increase of 64 mV, or 17% in the open-circuit voltage of a GaSb solar cell.
Degree
M.Sc.
Advisors
Wang, Purdue University.
Subject Area
Design|Alternative Energy|Condensed matter physics|Energy|Physics
Off-Campus Purdue Users:
To access this dissertation, please log in to our
proxy server.