Interfacial Tension and Phase Behavior of Oil/Aqueous Systems with Applications to Enhanced Oil Recovery

Jaeyub Chung, Purdue University

Abstract

Chemical enhanced oil recovery (cEOR) aims to increase the oil recovery of mature oil fields, using aqueous solutions of surfactants and polymers, to mobilize trapped oil and maintain production. The interfacial tensions (IFTs) between the injected aqueous solution, the oil droplets in reservoirs, and other possible phases formed (e.g., a “middle phase” microemulsion) are important for designing and assessing a chemical formulation. Ultralow IFTs, less than 10-2 mN·m1, are needed to increase the capillary number and help mobilize trapped oil droplets. Despite this fact, phase behavior tests have received more attention than IFTs for designing and evaluating surfactant formulations that result in high oil recovery efficiencies, because incorporating reliable IFTs into such evaluation process is avoided due to difficulties in obtaining reliable values. Hence, the main thrusts of this dissertation are to: (a) develop robust IFT measurement protocols for obtaining reliable IFTs regardless of the complexity of water and oil phase constituents and (b) improve the existing surfactant polymer formulation evaluation and screening processes by successfully incorporating the IFT as one of the critical parameters. First, two robust tensiometry protocols using the known emerging bubble method (EBM) and the spinning bubble method (SBM) were demonstrated, for determining accurately equilibrium surface tensions (ESTs) and equilibrium IFTs (EIFTs). The protocols are used for measuring the dynamic surface tensions (DSTs), determining the steady state values, and establishing the stability of the steady state values by applying small surface area perturbations by monitoring the ST or IFT relaxation behavior. The perturbations were applied by abruptly expanding or compressing surface areas by changing the bubble sizes with an automated dispenser for the EBM, and by altering the rotation frequency of the spinning tube for the SBM. Such robust tension measurement protocols were applied for Triton X-100 aqueous solutions at a fixed concentration above its critical micelle concentration (CMC). The EST value of the model solution was 31.5 ± 0.1 mN·m-1 with the EBM and 30.8 ± 0.2 mN·m-1with the SBM. These protocols provide robust criteria for establishing the EST values. Second, the EIFTs of a commercial single chain anionic surfactant solution in a synthetic brine against a crude oil from an active reservoir were determined with the new protocol described earlier. The commercial surfactant used here has an oligopropoxy group between a hydrophobic chain and a sulfate head group. The synthetic brine has 9,700 ppm of total dissolved salts, which are a mixture of sodium chloride (NaCl), potassium chloride (KCl), manganese (II) chloride tetrahydrate (MnCl2·4H2O), magnesium (II) chloride hexahydrate (MgCl2·6H2O), barium chloride dihydrate (BaCl2·2H2O), sodium sulfate decahydrate (Na2SO4·10H2O), sodium bicarbonate (NaHCO3), and calcium chloride dihydrate (CaCl2·2H2O). The DSTs curves of the surfactant concentrations from 0.1 ppm to 10,000 ppm by weight had a simple adsorption/desorption equilibrium at air/water surface with surfactant diffusion from bulk aqueous phase. Such a mechanism was also observed from the tension relaxation behavior after area perturbations for the oil/water interfaces while DIFT measurements. The CMC of the commercial surfactant was determined to be 12 ppm in water and 1 ppm in the synthetic brine used.

Degree

Ph.D.

Advisors

Franses, Purdue University.

Subject Area

Petroleum engineering|Physics|Polymer chemistry

COinS