Pack Rust Identification and Mitigation Strategies for Steel Bridges
Abstract
Pack rust or crevice corrosion is a type of localized corrosion. When a metal is in contact with a metal, or even non-metal, the metal starts to corrode, and rust starts to pack in between the surfaces. When significant development of pack rust occurs, it can cause overstressing of bolts and rivets causing them to fail, and it can bend connecting plates and member elements thus reducing their buckling capacity. Thus it is important to mitigate the formation and growth of pack rust in bridges. This study was conducted to determine if pack rust occurs frequently and thereby may pose a problem in the state of Indiana. The study is divided into three primary tasks. The first part of the study involves understanding the parameters involved in the initiation process of crevice corrosion and post-initiation crevice corrosion process. The second part of the study involves reviewing existing mitigation strategies and repair procedures used by state DOTs. The third part of the study involves identifying steel bridges with pack rust in Indiana. Analyses were performed on the data collected from Indiana bridges that have pack rust. This involved finding the components and members of bridges which are most affected by pack rust and finding parameters which influence the formation of pack rust. Pack rust in the steel bridges were identified using the INDOT inspection reports available through BIAS system. The study revealed that good maintenance practices helped in reducing pack rust formation. The study identified locations on steel bridges which have a high probability towards pack rust formation. A mitigating strategy possessing qualities which can show promising results is identified.
Degree
M.Sc.
Advisors
Bowman, Purdue University.
Subject Area
Civil engineering|Economics|Energy
Off-Campus Purdue Users:
To access this dissertation, please log in to our
proxy server.