Subscribe to RSS Feed (Opens in New Window)

Schedule

A study on pre-calcified magnesium alloy in simulated body fluid

Jin Hu, Harbin Institute of Technology
Hui He, Harbin Institute of Technology

Adiabatic shear bands in magnesium alloys: Experimental and theoretical analysis

Pingli Mao, Shenyang University of Technology

Corrosion inhibition of 7150 Al alloy in the presence of some amino acids – molecular dynamics simulation, quantum chemical, and electrochemical studies

Qingqing Sun, Purdue University
Qingyou Han, Purdue University
Jie Li, Central South University
Russell Russell Sun, Central South University

Effect of preliminary heat treatment on change in microstructure of brass CuZn36 during pressing in equal channel step matrix

Irina Volokitina, Kazakh National Research Technical University named after K. Satpayev
Georgy Kurapov, Kazakh National Research Technical University named after K. Satpayev

Effects of sintering parameters on the microstructure and tensile properties of in situ (Ti5Si3 + TiBw)/Ti6Al4V composites with two-scale network architecture

Yang Jiao, Harbin Institute of Technology
L. J. Huang, Harbin Institute of Technology
L. Geng, Harbin Institute of Technology

Finite element simulation and experimental study of the effect of combining ultrasonic vibration with ECAP process on pure aluminum 1050

Saeed Bagherzadeh, Purdue University
Yanfei Liu, Purdue University
Karen Abrinia, University of Tehran
Qingyou Han, Purdue University

Hot deformation and processing maps of CNTs/Al composites fabricated by flake powder metallurgy

Baifeng Luan, Chongqing University

Influence of pre-stretching on the subsequent creep aging behavior of aluminum alloy 2524

Yongqian Xu, Central South University
Lihua Zhan, Central South University
Minghui Huang, Central South University
Youliang Yang, Central South University

Inverse modeling procedure for post-necking hardening behavior of commercial pure titanium sheet and its evaluation

Kangning Liu, Beijing University

Latest development in virtual casting of lightweight metals

Qigui Wang, General Motors Company Pontiac

Microstructural evolution in electron beam additive manufactured Ti–6Al–4V build plate: Thermal modeling and microstructural characterization

Jun Cao, Thermal Processing Technology Centre
Philip Nash, Thermal Processing Technology Centre

Modeling on tail pinch in finishing rolls during hot strip rolling

Jong-Ning Aoh, National Chung Cheng University
Han-Kai Hsu, National Chung Cheng University
Ming-Fa Chen, China Steel Corporation

Modeling the constitutive relationship of Al–0.62Mg–0.73Si alloy based on artificial neural network

Lianxi Hu, Harbin Institute of Technology
Yu Sun, Harbin Institute of Technology
Wenhong Ye, Harbin Institute of Technology

Multi-dome forming of a Ti–Al–Mn alloy

Sergey Aksenov, National Research University Higher School of Economics
Aleksey Kolesnikov, National Research Irkutsk State Technical University
Ivan Zakhariev, National Research University Higher School of Economics

Numerical and experimental characterization of material flow in forged aluminum wheel

Jong-Ning Aoh, National Chung Cheng University
Ming-Chiu Li, National Chung Cheng University
Chong-Jin Li, National Chung Cheng University

Numerical simulation for the solidification of magnesium alloy under ultrasonic

Fuze Zhao, Institute of Metal Research, Chinese Academy of Sciences
Xiaohui Feng, Institute of Metal Research, Chinese Academy of Sciences
Yuansheng Yang, Institute of Metal Research, Chinese Academy of Sciences

Numerical simulation of mechanical wave propagation during solidification of ZL205A alloy

Wang Rujia, Harbin Institute of Technology
Wu Shi Ping, Harbin Institute of Technology
Chen Wei, Harbin Institute of Technology

Numerical simulation of the influence of ceramic preform on the infiltration process of metal matrix composites

Chang-chun Dong, Huazhong University of Science and Technology
Jian-xin Zhou, Huazhong University of Science and Technology
Ya-jun Yin, Huazhong University of Science and Technology
Xu Shen, Huazhong University of Science and Technology

Numerical simulation of the through process of aerospace titanium alloy casting filling, solidification, and hot isostatic pressing

Jian-xin Zhou, Huazhong University of Science and Technology
Zhao Guo, Huazhong University of Science and Technology
Ya-jun Yin, Huazhong University of Science and Technology
Chang-chang Liu, Huazhong University of Science and Technology

Residual stresses relaxation in laser beam welded Ti–6Al–4V alloy treated by post-weld local rapid induction heating

Yan Liu, Harbin Institute of Technology
Jin Hu, Harbin Institute of Technology

Simulation investigation of temperature distribution in large aluminium panel during autoclave age forming process

Yongqian Xu, Central South University

Simulation of the bite condition of AZ31 sheet rolling

Zuyan Liu, Harbin Institute of Technology

Simulation study of Al–1Mn/Al–10Si circular clad ingots prepared by direct chill casting

Li Wu, Dalian University of Technology
Tongmin Wang, Dalian University of Technology
Tingju Li, Dalian University of Technology

Steady-state simulation and die improvement on the extrusion of magnesium square tube with thin wall

Tao Lin, Institute of Metal Research, Chinese Academy of Sciences
Yun-Teng Liu, Institute of Metal Research, Chinese Academy of Sciences
Yuan-Sheng Yang, Institute of Metal Research, Chinese Academy of Sciences
Ji-Xue Zhou, Institute of Metal Research, Chinese Academy of Sciences

Temperature filed numerical simulation of laser welding for TA15 titanium alloy by coupling thermal and phase transformation

Wenmin Ou, Nanjing University of Aeronautics and Astronautics
Yanhong Wei, Nanjing University of Aeronautics and Astronautics
Xiaohong Zhan, Nanjing University of Aeronautics and Astronautics
Gaoyang Mi, Huazhong University of Science and Technology

The microsegregation of solute elements in a Ni-based single crystal superalloy with pulsed magnetic field

Yingju Li, Institute of Metal Research, Chinese Academy of Sciences
Yuefei Teng, Institute of Metal Research, Chinese Academy of Sciences
Xiaohui Feng, Institute of Metal Research, Chinese Academy of Sciences
Yuansheng Yang, Institute of Metal Research, Chinese Academy of Sciences

Thermodynamic simulation for solidification path in die casting alloy development

Mohamad Rusydi Mohamad Yasin, Purdue University
Dongke Sun, Purdue University
Qingyou Han, Purdue University